Fix win32kfull.sys BSOD in Windows 10

Fix win32kfull.sys BSOD in Windows 10

Your PC has a set of two drivers, regular drivers are chargeable for communication between your OS and {hardware} whereas, different kernel-mode drivers are crucial for booting the Operating System. The win32kfull.sys file is among the kernel-mode drivers in your PC. Any issues in win32kfull.sys file occurs when you’ve gotten {hardware} points in your pc. In some situations, you might face win32kfull.sys BSOD Windows 10 difficulty while you boot your PC. This could be very irritating since you can not use your PC when wanted. Hopefully to carry your PC again to regular when dealing with the Blue Screen of Death error, maintain the ability button for five to 10 seconds. Windows may routinely repair the issue and restart your pc. If not, we’re right here that can assist you with the perfect troubleshooting strategies to repair win32kfull.sys Blue Screen error on Windows 10 PC.

Fix win32kfull.sys BSOD in Windows 10

How to Fix win32kfull.sys BSOD in Windows 10

This is the total context of one other frequent error:




As mentioned earlier, win32kfull.sys files are kernel-mode drivers chargeable for booting your Windows. These drivers are chargeable for establishing a connection between inside and exterior {hardware} gadgets like a printer. You may additionally face this error code in apps equivalent to Blue Screen error in Edge.

You will obtain one of many following messages while you face BSOD error attributable to win32kfull.sys recordsdata:

  • STOP 0×00000050: PAGE_FAULT_IN_NONPAGED_AREA – win32kfull.sys

Whenever you face this error, this means that your PC has detected some error and it has been powered off to forestall any damages. This happens attributable to heavy load and when corrupt system reminiscence is referenced.

  • STOP 0x0000001E: KMODE_EXCEPTION_NOT_HANDLED – win32kfull.sys

This error happens attributable to misconfigured drivers. It typically outcomes in blue display error which will be fastened by following the below-discussed troubleshooting strategies.

  • STOP 0x0000000A: IRQL_NOT_LESS_EQUAL – win32kfull.sys

This error happens when your PC tries to interrupt the endless loop of interrupts. All the interrupts are prioritized to forestall the impasse of recurring requests. Running the {hardware} troubleshooter and reinstalling incompatible drivers will enable you resolve the error.

Irrespective of all these errors and their varieties, you might use this troubleshooting information to repair all forms of points from win32kfull.sys file.

What Causes win32kfull.sys Blue Screen Error?

Here are some frequent causes that causes win32kfull.sys BSOD Windows 10 downside. Try to investigate the causes as a way to repair the issue in keeping with them:

  • Presence of outdated or incompatible drivers in your PC, will result in win32kfull.sys BSOD.
  • If the PC has any defective registry keys whereas putting in/uninstalling any incompatible program, the error is extra more likely to occur.
  • Presence of malware in PC and any conflicts between {hardware} and gadgets.
  • If there are any corrupt or lacking program recordsdata, you’ll face win32kfull.sys BSOD Windows 10 error.
  • Corrupt RAM and reminiscence points in PC.

Method 1: Run Printer Troubleshooter

Few of you may face win32kfull.sys BSOD error whereas printing paperwork. In this case, conflicts between the {hardware} and the OS contribute to the issue. You can remedy this by working the corresponding troubleshooter as mentioned under:

1. Press Windows + I keys concurrently to open Settings.

2. Click pn Update & Security.

Click Update and Security

3. Click Troubleshoot. Then, choose Printer and click on on Run the troubleshooter.

run the troubleshooter for Printer. Fix win32kfull.sys BSOD in Windows 10

4. Your system will endure a screening course of. Wait for the method to be full, and if any difficulty is discovered in your system, click on Apply this repair and observe the directions given in the successive prompts.

click on Apply this fix

5. Finally, restart your PC 

Method 2: Repair System Files

The System File Checker instrument is a useful instrument to restore any corrupt recordsdata in your pc. All the broken system recordsdata are routinely sorted and repaired while you execute a easy command line. Also, you possibly can restore the important lacking recordsdata through the use of the SFC command instrument. To run SFC and DISM instruments, observe the below-mentioned steps.

1. Hit the Windows key, sort Command Prompt and click on on Run as administrator.

Open Start menu, type Command Prompt and click on Run as administrator on the right pane. Fix win32kfull.sys BSOD in Windows 10

2. Click on Yes in the User Account Control immediate.

3. Type chkdsk C: /f /r /x command and hit Enter key.

 chkdsk command

4. If you might be prompted with a message, Chkdsk can’t run…the amount is… in use course of, then, sort Y and hit the Enter key.

5. Again, sort the command: sfc /scannow and press Enter key to run the System File Checker scan.

Type the below command line and hit Enter to execute it. Fix win32kfull.sys BSOD in Windows 10

Note: A system scan will probably be initiated and it’ll take a few minutes to complete. Meanwhile, you possibly can proceed performing different actions however be aware of not by accident closing the window.

After finishing the scan, it’ll present both of those messages:

  • Windows Resource Protection didn’t discover any integrity violations.
  • Windows Resource Protection couldn’t carry out the requested operation.
  • Windows Resource Protection discovered corrupt recordsdata and efficiently repaired them.
  • Windows Resource Protection discovered corrupt recordsdata however was unable to repair a few of them.

6. Once the scan is completed, restart your PC.

7. Again, launch Command Prompt as administrator and execute the given instructions one after the opposite:

dism.exe /Online /cleanup-image /scanhealth
dism.exe /Online /cleanup-image /restorehealth
dism.exe /Online /cleanup-image /startcomponentcleanup

Note: You will need to have a working web connection to execute DISM instructions correctly.

scan health command in Command Prompt

Also Read: Fix Windows 10 Netwtw04.sys Blue Screen Error

Method 3: Use Windows Memory Diagnostic Tool

The Windows Memory Diagnostic Tool is a free reminiscence check program to make sure any points with the system reminiscence triggering win32kfull.sys BSOD. This instrument is simple to make use of, and the system will probably be rebooted after sorting the errors. Follow the below-mentioned steps to make use of Windows Memory Diagnostic instrument.

1. Hit your Windows key and kind Windows Memory Diagnostic in the search bar and Open.

Open windows memory diagnostic. Fix win32kfull.sys BSOD in Windows 10

2. Click on Restart now and examine for issues (beneficial) choice to scan your pc for reminiscence issues.

Note: Save your work and shut any open applications earlier than restarting.


3. Now, after a restart, Windows Memory Diagnostics Tool will open up. Then, hit the F1 key to open Options.

Now, after a restart, and Windows Memory Diagnostics Tool will open up. Then, hit the F1 key to open Options. Fix win32kfull.sys BSOD in Windows 10

4. Here, use the arrow keys to navigate to the Extended choice and hit F10 to Apply.

Note: The Extended checks embody all the usual checks plus MATS+ (cache disabled). Stride38, WSCHCKR, WStride-6. CHCKR4, WCHCKR3, ERAND, Stride6 (Cache disabled), and CHCKRS.

Here, use the arrow keys to navigate to the Extended option and hit F10 to Apply

5. Wait till the reminiscence check is accomplished (this may take a number of minutes) and examine if any errors are reported. If any, be aware down the errors (troubleshoot them accordingly) and hit ESC to Exit the instrument.

Wait until the memory test is completed and check if any errors are reported. Fix win32kfull.sys BSOD in Windows 10

Also Read: Fix Windows 10 Blue Screen Error

Method 5: Run Malware Scan

The win32kfull.sys BSOD might happen attributable to malware assaults in your PC. The bugs that intruded in the PC may infect and corrupt the important .sys recordsdata resulting in the mentioned error. Wondering How do I Run a Virus Scan on my Computer? Here’s How to Remove Malware out of your PC in Windows 10.

Method 6: Update Drivers

The win32kfull.sys BSOD error may happen when you’ve gotten outdated drivers. Often, incompatible drivers additionally result in the identical difficulty. To keep away from any errors, replace all of the drivers in your PC as instructed under:

1. Hit the Windows key and kind Device Manager, click on on Open.

Click on Start and type Device Manager. Click on Open. Fix win32kfull.sys BSOD in Windows 10

2. You will see the Network adapters on the primary panel; double-click on it to broaden it.

You will see the Network adapters on the main panel; double click on it to expand it

3. Right-click on the community driver (e.g. Intel(R) Dual Band Wireless-AC 3168) and click on Update driver.

right click on the driver and click Update driver. Fix win32kfull.sys BSOD in Windows 10

4. Now, click on on Search routinely for drivers choices to find and set up a driver routinely.

Now, click on Search automatically for drivers options to locate and install a driver automatically

5A. Now, the drivers will probably be up to date to the most recent model if they aren’t up to date.

5B. If they’re already in an up to date stage, the display shows the next message, The finest drivers in your system are already put in. Click on Close to exit the window.

If they are already in an updated stage, the screen displays the following message, The best drivers for your device are already installed. Fix win32kfull.sys BSOD in Windows 10

Also Read: Fix Red Screen of Death Error (RSOD) on Windows 10

Method 7: Update Windows

Microsoft is making an attempt it’s enhancing all of its variations of Windows to carry a PC with none errors. You can repair the bugs and patch-related issues in your Windows 10 pc by updating it as follows:

1. Press Windows + I keys concurrently to launch Settings.

2. Click on the Update & Security tile, as proven.

Update and Security. Fix win32kfull.sys BSOD in Windows 10

3. In the Windows Update tab, click on on Check for updates button.

Click on Check for updates button. Fix win32kfull.sys BSOD in Windows 10

4A. If a brand new replace is obtainable, then click on Install now and observe the on-screen directions. Restart your PC when performed.

Click on install now to download the available updates

4B. Otherwise, it’ll present You’re updated message as proven.

windows update you're up to date message. Fix win32kfull.sys BSOD in Windows 10

Method 8: Uninstall Recently Installed Programs

If you’ve gotten put in a brand new program not too long ago in your PC after which experiencing win32kfull.sys Blue Screen error, then it signifies that this system is incompatible together with your PC. Here’s how to take action:

1. Follow our information on How to Boot to Safe Mode in Windows 10 right here.

2. Now hit the Windows key, sort apps and options, and click on on Open

type apps and features and click on Open in Windows 10 search bar

3. Click on the conflicting/suspicious app (e.g. Battle.web) and choose Uninstall choice, as depicted under.

uninstall blizzard from apps and features settings. Fix win32kfull.sys BSOD in Windows 10

4. Click on Uninstall once more to verify the identical.

5. Finally, restart your PC.

Also Read: How to Fix Window 10 Laptop White Screen

Method 9: Uninstall Recent Updates

If you face the mentioned downside after updating Windows OS, your web browsing expertise is likely to be incompatible with the brand new replace and, in this case, uninstall current updates on PC. You may even get the steadiness of your PC after uninstalling a defective replace. Here is the way to do it.

1. Press and maintain Windows + R keys collectively to open Run dialog field.

2. Type appwiz.cpl as proven and hit Enter.

Now, type appwiz.cpl as shown and hit Enter. Fix win32kfull.sys BSOD in Windows 10

3. Click on View put in updates.

Now, click on View installed updates in the left pane

4. Select the most up-to-date replace and click on on Uninstall.

Now, select the most recent update and click on Uninstall option. Fix win32kfull.sys BSOD in Windows 10

5. Confirm the immediate, if any, and reboot your PC.

Method 10: Clean Boot PC

The points regarding the win32kfull.sys BSOD Windows 10 will be fastened by a clear boot of all important providers and recordsdata in your Windows 10 system, as defined in this methodology.

Note: Make certain you login as an administrator to carry out Windows clear boot.

1. Launch the Run dialog field, sort the msconfig and click on the OK button.

After entering the following command in the Run text box msconfig, click the OK button.

2. The System Configuration window seems. Next, change to the Services tab.

3. Check the field subsequent to Hide all Microsoft providers, and click on on Disable all button as proven highlighted.

Check the box next to Hide all Microsoft services, and click on Disable all button. Fix win32kfull.sys BSOD in Windows 10

4. Switch to the Startup tab and click on the hyperlink to Open Task Manager.

select the startup tab and open task manager

5. Now, the Task Manager window will pop up. Switch to the Startup tab.

6. Select the startup duties which aren’t required and click on Disable displayed in the underside proper nook.

Click on disable. Fix Taskbar Right Click Not Working

7. Exit the Task Manager and System Configuration window. Finally, restart your PC.

Also Read: Fix Windows 10 Yellow Screen of Death

Method 11: Perform System Restore

You might face the mentioned difficulty after updating your Operating System. If so, then you possibly can restore your Windows 10 system to its earlier model.

Method 12: Reset PC

If you didn’t attain any repair by following all of the above-discussed strategies, then there may be the final likelihood to reset your PC as follows:

1. Press the Windows + I keys collectively to open Settings in your system.

2. Select Update & Security.

Now, scroll down the list and select Update and Security.

3. Select the Recovery choice and click on on Get began.

Now, select the Recovery option from the left pane and click on Get started in the right pane. Fix win32kfull.sys BSOD in Windows 10

4. Now, select an choice from the Reset this PC window.

  • Keep my recordsdata choice will take away apps and settings however preserve your private recordsdata.
  • Remove all the things choice will take away all of your private recordsdata, apps, and settings.

Now, choose an option from the Reset this PC window.

 5. Finally, observe the on-screen directions to finish the reset course of.


We hope that this information was useful and you possibly can repair win32kfull.sys BSOD in Windows 10. Let us know which methodology labored for you the perfect. Also, if in case you have any queries/strategies relating to this text, then be at liberty to drop them in the feedback part.