Fix PS4 Controller Flashing White

When you purchase a PS4 recreation console, it usually comes with a controller. You will obtain the DualShock 4 wi-fi controller, which connects to the sport system with out the usage of cables. Throughout the lifetime of the controller, there have been a number of ups and downs, starting from the shortcoming to hook up with the console to disconnecting in the course of a recreation. One of probably the most aggravating points is when the PS4 controller flashing white. If you might be dealing with the identical, this text will enable you to repair the PS4 controller blinking white situation.

How to Fix PS4 Controller Flashing White

This drawback could be attributable to quite a lot of circumstances, as listed beneath:

• Controller malfunction,
• Setting misconfiguration,
• System software program fault,
• Controller battery dies,
• Controller is unable to hook up with the console.

This prevalence is moderately frequent, and there are easy options obtainable.

Method 1: Troubleshoot Hardware

PS4 controller flashing white points can happen on account of {hardware} difficulties. If the inner mechanism fails, chances are you’ll not have the ability to join it to the console or cost the controller. You can comply with the beneath strategies:

Option I: Recharge Controller

If the controller had not been used for a very long time, the controller may need been discharged. In this case, cost your controller for a minimum of 2 hours.

Note: If your controller activates whereas plugging in and turns off after unplugging, it’s a must to substitute the battery.

Option II: Reset Controller

Resetting the PS4 controller may remedy loads of issues. To completely reset the controller so that you could join, it’s essential to comply with particular directions.

Note: There is somewhat reset button on the again of PS4 controllers. You’ll want a little pin to position into the outlet to press the button.

1. Press the reset button in your controller utilizing a small pin for three seconds.

Note: Keep your PS4 turned on and make sure the white gentle blinks whereas performing this.

2. Once you’ve reset the controller, flip off your PS4 utterly.

3. Now, anticipate 2–3 minutes.

4. Connect the controller to your PlayStation 4 and restart the machine.

Note: If this didn’t be just right for you, you can strive one other workaround. Just press and maintain the Share and PS buttons concurrently. Wait until the PS4 activates.

Also Read: Fix PS4 (PlayStation 4) Turning Off By Itself

Option III: Use Micro USB Cables

A micro-USB cable can be utilized along with wirelessly attaching your PS4 controller. The micro-USB twine could also be used to create a connection at first, after which you’ll be able to rapidly change to Bluetooth after it’s established. We’ll attempt to energy cycle your controller right here to see if any incorrect configurations are additionally current.

1. Turn off your PS4 from the entrance of the console to place it in sleep mode.

2. Unplug the energy line from the outlet after all of the console lights have gone out.

3. To assure that each one energy has been drained, press the PS4 energy button for 30 seconds.

4. Turn on the PS4.

5. Now, join the controller to the PS4 utilizing a micro-USB twine.

6. To start the sport, press any button.

Option IV: Use Another USB Cable

If you’ve double-checked that your USB cable is inserted accurately and doesn’t lose connection, strive a special USB cable.

• First and foremost, it’s your decision one other PS4 USB cable that features effectively, and chances are you’ll get one at an inexpensive worth and optimistic scores on Amazon.
• Correctly join the connection to your PS4 and the controller.
• To take a look at your PS4 and controller, flip them on. If it really works usually, the issue seems to be together with your cable.

Option V: Use Second Controller

Using a second controller is one other answer that many individuals discover useful. If you’ve examined the USB twine and it’s effective, you’ll be able to strive one other PS4 controller to see if the PS4 controller flashing white drawback is with the controller {hardware}. We’ll alter some settings on the second controller earlier than trying to attach the primary controller, which is glowing white.

1. Make positive that the second controller is accurately linked to the console and that it’s operational.

2. Go to Settings.

3. Choose Devices.

4. Go to Bluetooth Devices with the second controller.

Note: Make positive that this window solely incorporates the useful controller.

5. Press the Share button for round 5 seconds on the controller that isn’t working.

6. Additionally, maintain down the PS button till the sunshine bar flashes twice per second or so.

7. After finishing each processes, each controllers ought to now be displayed.

8. Select the not-functioning controller to attach with the machine utilizing the working controller.

9. Press the Options button on the second controller.

10. Select Forget Device.

11. Finally, choose OK to substantiate.

Also Read: 7 Ways to Fix PS4 (PlayStation 4) Freezing and Lagging

Method 2: Update Controller Driver

The PS4 controller could also be mounted by updating the PS4 machine and driver on a PC. The PS4 driver, like some other driver, may develop into corrupt or outdated, leading to system failure. The PS4 controller is acknowledged as a tool when linked to the pc. To achieve this, comply with the beneath steps and repair PS4 controller blinking white situation.

Note: To achieve this, it’s good to join your controller to the PC utilizing a USB cable or Bluetooth.

1. Press the Windows key. Type Device Manager and click on on Open.

2. Double-click on Human Interface Devices to increase the drivers.

3. Now, look and right-click on the controller machine.

Note: If you can’t discover the controller underneath Human Interface Devices, then search for the controller driver in Universal Serial Bus controllers.

4. Click on Uninstall machine.

5. Check the field subsequent to Delete the driving force software program for this machine and click on on Uninstall.

6. Unplug the controller from the machine.

7. Then, restart the machine.

8. Visit the Sony PlayStation update firmware page and click on on the Download button.

9. Click on the downloaded installer file to put in and run the installer.

10. Click on Yes within the immediate.

11. Select the most popular language and click on on OK.

12. Click on Next > within the InstallDefend Wizard window.

13. Select the choice I settle for the phrases within the license settlement and click on on Next >.

14. Click on Next > within the subsequent window.

15. Click on Install.

16. Select the choice Launch Program and click on on Finish.

17. Now, re-connect your controller to your PC utilizing a USB cable.

18. Follow the on-screen directions to replace the controller firmware.

Method 3: Update System Software

You may also strive updating the console system to resolve any points. Follow the beneath steps to repair the PS4 controller blinking white situation:

1. Turn off the PS4 by urgent the Power Button on the entrance panel.

2. After your PlayStation 4 is turned off, press and maintain the Power Button till two beeps are heard.

3. Connect your PS4 controller through USB to your machine.

4. Then, press the PlayStation button on the controller.

5. Once you’re in protected mode, select the Update System Software.

Also Read: Fix Xbox One Headset Not Working

Method 4: Use Safe Mode

Many PS4 house owners discover that beginning the console in Safe Mode solves the issue. Safe Mode lets you boot up your machine with solely the essential performance. To enter protected mode, comply with these steps and repair PS4 controller blinking white situation.

Note: This choice can delete your PlayStation 4 knowledge and settings. Make positive you save your knowledge accurately earlier than starting this method.

1. Press the Power Button on the entrance panel of the PS4 to flip it off.

2. Now, press and maintain the Power Button till two beeps are heard.

3. Connect your PS4 controller through USB to your PlayStation.

4. Now, press the PlayStation button on the controller.

5. Once you’re in protected mode, select the fifth choice, Rebuild Database.

6. Wait for the operation to be accomplished and verify if the difficulty has been resolved.

Note: If rebuilding the database is unsuccessful, you’ll be able to improve your system software program as performed within the earlier methodology.

Recommended:

We hope you discovered this data helpful and that you just had been capable of repair the PS4 controller flashing white situation. Please tell us which method was probably the most helpful for you. Please use the shape beneath you probably have any queries or feedback. Also, tell us what you wish to be taught subsequent.